New GOLDFREN Brake Pad - S3 Sintered Sports (PBPH173) #GF122S3

GOLDfren began manufacturing sintered disc brake pads for a wide range of off-road and road motorcycles in 1991, nearly three decades on from their first motorcycle brake pads GOLDfren has become one of the largest aftermarket manufacturers in the motorcycle brake disc pad industry. Their development of next-generation products has kept them at the technological forefront of Sintered Friction Braking providing you with confidence in the performance, durability and reliability of your brakes.

S3 Series:

The S3 sintered compound is optimal in dry and wet conditions for road & off-road motorcycles. For the road application, S3 pads are suitable for both the front and rear brake while on off-road applications the S3 is only recommended for the front brake. The S3 series is designed for low abrasive interaction with the rotor and quieter braking due to the ceramic composite material. It has an HH friction rating and performs better at higher temperatures than the AD compound. Friction materials contain metal-ceramic with a bronze-graphite and non-metallic friction additives are spread evenly on the base fine bronze body to achieve optimal friction properties.

Features:

• Very high static friction coefficient
• Minimal difference between wet and dry braking performance
• Good abrasive resistance
• Low abrasive interaction with the brake rotor material
• Longer life compared to organic and Kevlar composite materials

Application:

• For riders who demand a bit more than average from their bikes
• Recommended on both front and rear brakes (road application)
• Can also be used on the front brakes of off-road bikes and ATVs
• Works well on both dry and wet conditions

Operating Parameters:

• Specific pressure: 3.0 Mpa
• Sliding speed: 45 m/s
• Constant maximum temp: 450°C
• Short time maximum temp: 800°C
• Counter-surfaces: steel disks

What is a sintered brake pad?

GOLDfren only manufacturers sintered brake pads that contain metal-ceramic and ceramic-carbon friction materials, these materials allow for less brake dust and a quieter braking experience. Sintered brake pads are made by fusing together metallic particles under high temperature and pressure which enhances friction properties and pad life, resulting in longer life and stronger braking. Sintered brake pads experience no brake fade when operating at high temperatures and in wet conditions. They also last up to 5 times longer than organic pads and provide additional braking strength. All materials used are environmentally friendly and do not contain any lead, asbestos, fibreglass or formaldehyde.

Reminder: one set of brake pads services one brake disc, if you are servicing multiple discs you will need multiple sets of brake pads.

Make	Model	Year Range	Capacity
Aprilia	RS50	1999-2005	50
Aprilia	RS50 REPLICA	2003-2003	50
Benelli	250 VELVET	1999-1999	250
Benelli	400 VELVET	2003-2004	400
GasGas	250 PAMPERA	2004-2005	250
Gilera	125 DNA	2000-2003	125
Gilera	180 DNA BREMBO	2000-2003	180
Gilera	FX125 RUNNER SP	1999-2003	125
Gilera	FXR180 RUNNER SP GRIMECA	1999-2002	180
Gilera	VX125 RUNNER GRIMECA	2001-2003	125
Gilera	VXR 200 (4 stroke)	2002-2007	200
Gilera	VXR180 RUNNER 4T GRIMECA	2001-2003	180
Malaguti	200 MADISON	2003-2004	200
Peugeot	125 ELYSEO	1999-2002	125
Peugeot	125 ELYSTAR	2003-2010	125
Peugeot	125 JET-FORCE COMPRESSOR	2003-2006	125
Peugeot	150 ELYSTAR	2003-2006	150
Peugeot	250 GEOPOLIS, ABS	2006-2009	250
Piaggio/Vespa	150 BEVERLEY	2004-2006	150
Vespa	GT200 GRANTURISMO	2006-2006	200

 

FA194 | FDB677 | 00H04703141 | 119 493 00 | 119 495 00 | 11955700 | 11967800 | 13D FS811 00 | 14360258000 | 1677 | 1D5 F5811 00 | 2525340000 | 494628 | 5WX W0045 00 | 754605 | 756020 | 8113523 | 9300080 | K00976315 | K01309079 | PE757231 | R050371008000 | R290063110000 | R43440 311A0 | GF122-S3 | 689