New GOLDFREN Brake Pad - S3 Sintered Sports (PBPH172) #GF098S3

GOLDfren began manufacturing sintered disc brake pads for a wide range of off-road and road motorcycles in 1991, nearly three decades on from their first motorcycle brake pads GOLDfren has become one of the largest aftermarket manufacturers in the motorcycle brake disc pad industry. Their development of next-generation products has kept them at the technological forefront of Sintered Friction Braking providing you with confidence in the performance, durability and reliability of your brakes.

S3 Series:

The S3 sintered compound is optimal in dry and wet conditions for road & off-road motorcycles. For the road application, S3 pads are suitable for both the front and rear brake while on off-road applications the S3 is only recommended for the front brake. The S3 series is designed for low abrasive interaction with the rotor and quieter braking due to the ceramic composite material. It has an HH friction rating and performs better at higher temperatures than the AD compound. Friction materials contain metal-ceramic with a bronze-graphite and non-metallic friction additives are spread evenly on the base fine bronze body to achieve optimal friction properties.

Features:

• Very high static friction coefficient
• Minimal difference between wet and dry braking performance
• Good abrasive resistance
• Low abrasive interaction with the brake rotor material
• Longer life compared to organic and Kevlar composite materials

Application:

• For riders who demand a bit more than average from their bikes
• Recommended on both front and rear brakes (road application)
• Can also be used on the front brakes of off-road bikes and ATVs
• Works well on both dry and wet conditions

Operating Parameters:

• Specific pressure: 3.0 Mpa
• Sliding speed: 45 m/s
• Constant maximum temp: 450°C
• Short time maximum temp: 800°C
• Counter-surfaces: steel disks

What is a sintered brake pad?

GOLDfren only manufacturers sintered brake pads that contain metal-ceramic and ceramic-carbon friction materials, these materials allow for less brake dust and a quieter braking experience. Sintered brake pads are made by fusing together metallic particles under high temperature and pressure which enhances friction properties and pad life, resulting in longer life and stronger braking. Sintered brake pads experience no brake fade when operating at high temperatures and in wet conditions. They also last up to 5 times longer than organic pads and provide additional braking strength. All materials used are environmentally friendly and do not contain any lead, asbestos, fibreglass or formaldehyde.

Reminder: one set of brake pads services one brake disc, if you are servicing multiple discs you will need multiple sets of brake pads.

Make	Model	Year Range	Capacity
Aprilia	125 LEONARDO	1997-2004	125
Aprilia	150 LEONARDO	1997-1998	150
Aprilia	Mojito Custom (2 stroke) 50	2002-2008	50
Aprilia	Rally 50	1995-2009	50
Aprilia	SR MT 50	2013-2018	50
Aprilia	SR50R	2014-2018	50
Aprilia	SR50R (CARBY)	2013-2013	50
Benelli	Pepe/LX 50	1999-2010	49
Gilera	FX125 RUNNER SP	2001-2002	125
Gilera	FXR180 RUNNER SP GRIMECA	2001-2002	180
Honda	SH100 SCOOPY	1996-2001	100
Malaguti	50 YESTERDAY	1998-1998	50
Peugeot	50 SPEEDFIGHT 2 LC	2001-2001	50
Piaggio/Vespa	TPH 50 TYPHOON	1994-2004	50
Yamaha	BWS 50	1999-2005	49
Yamaha	CS 50 Jog R	2002-2005	49
Yamaha	YW50 Beewee	2006-2018	49

 

FA193 | FDB680 | 06455 GBM 750 | 06455 GBY 910 | 06455 GCM 900 | 119 468 00 | 119 502 00 | 2525240000 | 2525370000 | 3YK W0045 01 | 45120 J4A T000 | 498408 | 498454 | 4CU F5811 20 | 4CU W0045 00 | 4VV F5811 00 | 59300 09820 | 59300 35810 | 59330 09EF0 | 59330 35E00 | 5ME FS811 00 | 5MF F5811 00 | 5RW FS811 00 | 647172 | 752667 | 811 3638 | 811 3644 | 811 3663 | 821 3192 | 821 3223 | 821 3245 | 821 3246 | 821 3571 | 821 3590 | 821 3638 | PE 759057 | R434 2009 1A0 | R434 2021 1A0 | R444 2004 1A0 | GF098-S3 | 697 | 725