New GOLDFREN Brake Pad - S3 Sintered Sports (PBPH05) #GF082S3

GOLDfren began manufacturing sintered disc brake pads for a wide range of off-road and road motorcycles in 1991, nearly three decades on from their first motorcycle brake pads GOLDfren has become one of the largest aftermarket manufacturers in the motorcycle brake disc pad industry. Their development of next-generation products has kept them at the technological forefront of Sintered Friction Braking providing you with confidence in the performance, durability and reliability of your brakes.

S3 Series:

The S3 sintered compound is optimal in dry and wet conditions for road & off-road motorcycles. For the road application, S3 pads are suitable for both the front and rear brake while on off-road applications the S3 is only recommended for the front brake. The S3 series is designed for low abrasive interaction with the rotor and quieter braking due to the ceramic composite material. It has an HH friction rating and performs better at higher temperatures than the AD compound. Friction materials contain metal-ceramic with a bronze-graphite and non-metallic friction additives are spread evenly on the base fine bronze body to achieve optimal friction properties.

Features:

• Very high static friction coefficient
• Minimal difference between wet and dry braking performance
• Good abrasive resistance
• Low abrasive interaction with the brake rotor material
• Longer life compared to organic and Kevlar composite materials

Application:

• For riders who demand a bit more than average from their bikes
• Recommended on both front and rear brakes (road application)
• Can also be used on the front brakes of off-road bikes and ATVs
• Works well on both dry and wet conditions

Operating Parameters:

• Specific pressure: 3.0 Mpa
• Sliding speed: 45 m/s
• Constant maximum temp: 450°C
• Short time maximum temp: 800°C
• Counter-surfaces: steel disks

What is a sintered brake pad?

GOLDfren only manufacturers sintered brake pads that contain metal-ceramic and ceramic-carbon friction materials, these materials allow for less brake dust and a quieter braking experience. Sintered brake pads are made by fusing together metallic particles under high temperature and pressure which enhances friction properties and pad life, resulting in longer life and stronger braking. Sintered brake pads experience no brake fade when operating at high temperatures and in wet conditions. They also last up to 5 times longer than organic pads and provide additional braking strength. All materials used are environmentally friendly and do not contain any lead, asbestos, fibreglass or formaldehyde.

Reminder: one set of brake pads services one brake disc, if you are servicing multiple discs you will need multiple sets of brake pads.

Make	Model	Year Range	Capacity
Yamaha	SR500	1978-1982	500
Yamaha	XJ650	1980-1982	650
Yamaha	XS1100	1978-1981	1100
Yamaha	XS1100R	1981-1981	1100
Yamaha	XS250	1978-1981	250
Yamaha	XS360	1976-1977	360
Yamaha	XS400	1978-1979	400
Yamaha	XS650	1968-1985	650
Yamaha	XS650S	1979-1981	650
Yamaha	XS750	1977-1979	750
Yamaha	XS750SE	1979-1979	750
Yamaha	XS850	1978-1983	850
Yamaha	XV1000R	1981-1982	1000

 

FA34 | FDB177 | 1J3 20000 13 | 1J3 20000 63 | 1J3 20000 64 | 1J3 20000 70 | 1J3 W0045 00 | 1J3 W0046 00 | 1J9 20000 02 | 1L9 W0045 00 | 1L9 W0046 00 | 1U4 W0046 02 | 2J2 W0046 00 | 2J2 W0046 01 | 2MO W0046 00 | 2MO W0046 01 | 3G1 W0046 00 | 3H5 W0045 00 | 3H5 W0045 01 | 4KO W0045 00 | 4KO W0045 01 | 4KO W0045 02 | JU4 W0046 01 | GF082-S3 | 507