New GOLDFREN Brake Pad - S3 Sintered Sports (PBPH391) #GF117S3

GOLDfren began manufacturing sintered disc brake pads for a wide range of off-road and road motorcycles in 1991, nearly three decades on from their first motorcycle brake pads GOLDfren has become one of the largest aftermarket manufacturers in the motorcycle brake disc pad industry. Their development of next-generation products has kept them at the technological forefront of Sintered Friction Braking providing you with confidence in the performance, durability and reliability of your brakes.

S3 Series:

The S3 sintered compound is optimal in dry and wet conditions for road & off-road motorcycles. For the road application, S3 pads are suitable for both the front and rear brake while on off-road applications the S3 is only recommended for the front brake. The S3 series is designed for low abrasive interaction with the rotor and quieter braking due to the ceramic composite material. It has an HH friction rating and performs better at higher temperatures than the AD compound. Friction materials contain metal-ceramic with a bronze-graphite and non-metallic friction additives are spread evenly on the base fine bronze body to achieve optimal friction properties.

Features:

• Very high static friction coefficient
• Minimal difference between wet and dry braking performance
• Good abrasive resistance
• Low abrasive interaction with the brake rotor material
• Longer life compared to organic and Kevlar composite materials

Application:

• For riders who demand a bit more than average from their bikes
• Recommended on both front and rear brakes (road application)
• Can also be used on the front brakes of off-road bikes and ATVs
• Works well on both dry and wet conditions

Operating Parameters:

• Specific pressure: 3.0 Mpa
• Sliding speed: 45 m/s
• Constant maximum temp: 450°C
• Short time maximum temp: 800°C
• Counter-surfaces: steel disks

What is a sintered brake pad?

GOLDfren only manufacturers sintered brake pads that contain metal-ceramic and ceramic-carbon friction materials, these materials allow for less brake dust and a quieter braking experience. Sintered brake pads are made by fusing together metallic particles under high temperature and pressure which enhances friction properties and pad life, resulting in longer life and stronger braking. Sintered brake pads experience no brake fade when operating at high temperatures and in wet conditions. They also last up to 5 times longer than organic pads and provide additional braking strength. All materials used are environmentally friendly and do not contain any lead, asbestos, fibreglass or formaldehyde.

Reminder: one set of brake pads services one brake disc, if you are servicing multiple discs you will need multiple sets of brake pads.

Make	Model	Year Range	Capacity
BMW	K1	1988-1993	1000
BMW	K100	1989-1990	1000
BMW	K100LT	1989-1991	1000
BMW	K100RS	1989-1992	1000
BMW	K100RS SPORT	1983-1996	1000
BMW	K1100 LT	1989-1999	1100
BMW	K1100 LT SPECIAL EDITION	1992-1994	1100
BMW	K1100 RS	1991-1997	1100
BMW	K1100 RT	1992-1999	1100
BMW	K1200LT	1998-2000	1200
BMW	K1200RS	1997-2000	1200
BMW	R100R	1991-1995	1000
BMW	R1100GS	1993-1999	1100
BMW	R1100R	1993-2001	1100
BMW	R1100RS	1992-2001	1100
BMW	R1100RT	1994-2001	1100
BMW	R1100S	1998-2000	1085
BMW	R1100ST	2003-2006	1100
BMW	R1150GS	1998-2001	1130
BMW	R1200C	1997-2002	1200
BMW	R80GS	1991-1994	800
BMW	R80R	1992-1996	800
BMW	R850C	1998-2000	850
BMW	R850GS	1994-2007	850
BMW	R850R	1995-2002	850
BMW	R850RT	1998-2001	850

 

FA246 | FDB657 | 34 11 2 310 983 | 34 11 2 314 512 | 34 11 2 331 173 | 34 11 2 333 045 | 34 11 7 655 687 | 34 11 7 658 156 | 34 11 7 663 764 | GF117-S3 | 644 | 703