New GOLDFREN Brake Pad - S3 Sintered Sports (PBPH203) #GF088S3

GOLDfren began manufacturing sintered disc brake pads for a wide range of off-road and road motorcycles in 1991, nearly three decades on from their first motorcycle brake pads GOLDfren has become one of the largest aftermarket manufacturers in the motorcycle brake disc pad industry. Their development of next-generation products has kept them at the technological forefront of Sintered Friction Braking providing you with confidence in the performance, durability and reliability of your brakes.

S3 Series:

The S3 sintered compound is optimal in dry and wet conditions for road & off-road motorcycles. For the road application, S3 pads are suitable for both the front and rear brake while on off-road applications the S3 is only recommended for the front brake. The S3 series is designed for low abrasive interaction with the rotor and quieter braking due to the ceramic composite material. It has an HH friction rating and performs better at higher temperatures than the AD compound. Friction materials contain metal-ceramic with a bronze-graphite and non-metallic friction additives are spread evenly on the base fine bronze body to achieve optimal friction properties.

Features:

• Very high static friction coefficient
• Minimal difference between wet and dry braking performance
• Good abrasive resistance
• Low abrasive interaction with the brake rotor material
• Longer life compared to organic and Kevlar composite materials

Application:

• For riders who demand a bit more than average from their bikes
• Recommended on both front and rear brakes (road application)
• Can also be used on the front brakes of off-road bikes and ATVs
• Works well on both dry and wet conditions

Operating Parameters:

• Specific pressure: 3.0 Mpa
• Sliding speed: 45 m/s
• Constant maximum temp: 450°C
• Short time maximum temp: 800°C
• Counter-surfaces: steel disks

What is a sintered brake pad?

GOLDfren only manufacturers sintered brake pads that contain metal-ceramic and ceramic-carbon friction materials, these materials allow for less brake dust and a quieter braking experience. Sintered brake pads are made by fusing together metallic particles under high temperature and pressure which enhances friction properties and pad life, resulting in longer life and stronger braking. Sintered brake pads experience no brake fade when operating at high temperatures and in wet conditions. They also last up to 5 times longer than organic pads and provide additional braking strength. All materials used are environmentally friendly and do not contain any lead, asbestos, fibreglass or formaldehyde.

Reminder: one set of brake pads services one brake disc, if you are servicing multiple discs you will need multiple sets of brake pads.

Make	Model	Year Range	Capacity
Cagiva	900 GRAN CANYON DUAL SPORTS	2001-2001	900
Cagiva	900 I.E. ELEFANT	1990-1992	900
Cagiva	Gran Canyon	1998-2000	900
Cagiva	Navigator	2000-2005	1000
Daelim	125 ROADWIN	2004-2007	125
Honda	CA250TS REBEL	1994-2000	250
Hunter	250 SPYDER	2008-2009	250
Keeway	Speed 150	2012-2017	150
Kymco	Quannon 125	2013-2014	125
Triumph	885 SPEED TRIPLE VIN 43916	1994-1996	885
Triumph	DAYTONA 1000	1991-1995	1000
Triumph	DAYTONA 1200	1993-1998	1200
Triumph	DAYTONA 750	1990-1995	750
Triumph	DAYTONA 900	1992-1997	885
Triumph	DAYTONA SUPER III	1995-1995	900
Triumph	DAYTONA, SPORT 1000	1996-1996	1000
Triumph	SPEED TRIPLE 900	1994-1996	885
Triumph	SPRINT 900	1993-1998	885
Triumph	SPRINT RS	1999-2002	955
Triumph	TIGER 1050	2006-2013	1050
Triumph	TIGER 955	2004-2006	955
Triumph	TIGER SE ABS	2014-2014	1050
Triumph	TIGER, SE, ABS 1050	2007-2012	1050
Triumph	TRIDENT 750	1991-1997	750
Triumph	TRIDENT 900	1991-1998	900
Triumph	TROPHY 1200	1991-2002	1200
Triumph	TROPHY 900	1991-2001	900
Yamaha	XTZ750 SUPER TENERE	1990-1991	750

 

FA165/2 | FA215/2 | FDB631 | T 2020561 | GF088-S3 | 633 | 688