New GOLDFREN Brake Pad - S3 Sintered Sports (PBPH62) #GF069S3

GOLDfren began manufacturing sintered disc brake pads for a wide range of off-road and road motorcycles in 1991, nearly three decades on from their first motorcycle brake pads GOLDfren has become one of the largest aftermarket manufacturers in the motorcycle brake disc pad industry. Their development of next-generation products has kept them at the technological forefront of Sintered Friction Braking providing you with confidence in the performance, durability and reliability of your brakes.

S3 Series:

The S3 sintered compound is optimal in dry and wet conditions for road & off-road motorcycles. For the road application, S3 pads are suitable for both the front and rear brake while on off-road applications the S3 is only recommended for the front brake. The S3 series is designed for low abrasive interaction with the rotor and quieter braking due to the ceramic composite material. It has an HH friction rating and performs better at higher temperatures than the AD compound. Friction materials contain metal-ceramic with a bronze-graphite and non-metallic friction additives are spread evenly on the base fine bronze body to achieve optimal friction properties.

Features:

• Very high static friction coefficient
• Minimal difference between wet and dry braking performance
• Good abrasive resistance
• Low abrasive interaction with the brake rotor material
• Longer life compared to organic and Kevlar composite materials

Application:

• For riders who demand a bit more than average from their bikes
• Recommended on both front and rear brakes (road application)
• Can also be used on the front brakes of off-road bikes and ATVs
• Works well on both dry and wet conditions

Operating Parameters:

• Specific pressure: 3.0 Mpa
• Sliding speed: 45 m/s
• Constant maximum temp: 450°C
• Short time maximum temp: 800°C
• Counter-surfaces: steel disks

What is a sintered brake pad?

GOLDfren only manufacturers sintered brake pads that contain metal-ceramic and ceramic-carbon friction materials, these materials allow for less brake dust and a quieter braking experience. Sintered brake pads are made by fusing together metallic particles under high temperature and pressure which enhances friction properties and pad life, resulting in longer life and stronger braking. Sintered brake pads experience no brake fade when operating at high temperatures and in wet conditions. They also last up to 5 times longer than organic pads and provide additional braking strength. All materials used are environmentally friendly and do not contain any lead, asbestos, fibreglass or formaldehyde.

Reminder: one set of brake pads services one brake disc, if you are servicing multiple discs you will need multiple sets of brake pads.

Make	Model	Year Range	Capacity
Honda	CB1000F SUPER FOUR	1995-1998	1000
Honda	CB250 HORNET	1996-2001	250
Honda	CB400 SF Super Four	1996-1996	400
Honda	CB900F HORNET	2002-2007	900
Honda	CBR900RR FIREBLADE	1992-1997	900
Honda	NSR250 MC18	1988-1989	250
Honda	NSR250 MC21	1990-1993	250
Honda	NSR250 MC28	1994-1999	250
Honda	NT400 BROS	1988-1992	400
Honda	NT650 BROS	1988-1993	650
Honda	RS250R	1991-1991	250
Honda	RVF400	1994-1996	400
Honda	RVF750 RC45	1994-1999	750
Honda	VFR400 NC30	1990-1992	400
Honda	VFR400R (IMPORT NC30)	1989-1993	400
Honda	VFR750R RC30	1988-1993	750
Honda	VTR1000F FIRESTORM	1997-2007	1000
Kawasaki	KL250	1983-1984	250

 

FA187 | FDB858 | 06455 MBB 006 | 06455 MCZ 006 | 06455 MZ1 405 | 45105 MN8 006 | 45105 MR7 006 | 45105 MR7 612 | 45105 MR7 681 | 45105 MW0 405 | 45105 MW0 415 | 45106 KV3 701 | GF069-S3 | 622