New GOLDFREN Brake Pad - S3 Sintered Sports (PBPH122) #GF039S3

GOLDfren began manufacturing sintered disc brake pads for a wide range of off-road and road motorcycles in 1991, nearly three decades on from their first motorcycle brake pads GOLDfren has become one of the largest aftermarket manufacturers in the motorcycle brake disc pad industry. Their development of next-generation products has kept them at the technological forefront of Sintered Friction Braking providing you with confidence in the performance, durability and reliability of your brakes.

S3 Series:

The S3 sintered compound is optimal in dry and wet conditions for road & off-road motorcycles. For the road application, S3 pads are suitable for both the front and rear brake while on off-road applications the S3 is only recommended for the front brake. The S3 series is designed for low abrasive interaction with the rotor and quieter braking due to the ceramic composite material. It has an HH friction rating and performs better at higher temperatures than the AD compound. Friction materials contain metal-ceramic with a bronze-graphite and non-metallic friction additives are spread evenly on the base fine bronze body to achieve optimal friction properties.

Features:

• Very high static friction coefficient
• Minimal difference between wet and dry braking performance
• Good abrasive resistance
• Low abrasive interaction with the brake rotor material
• Longer life compared to organic and Kevlar composite materials

Application:

• For riders who demand a bit more than average from their bikes
• Recommended on both front and rear brakes (road application)
• Can also be used on the front brakes of off-road bikes and ATVs
• Works well on both dry and wet conditions

Operating Parameters:

• Specific pressure: 3.0 Mpa
• Sliding speed: 45 m/s
• Constant maximum temp: 450°C
• Short time maximum temp: 800°C
• Counter-surfaces: steel disks

What is a sintered brake pad?

GOLDfren only manufacturers sintered brake pads that contain metal-ceramic and ceramic-carbon friction materials, these materials allow for less brake dust and a quieter braking experience. Sintered brake pads are made by fusing together metallic particles under high temperature and pressure which enhances friction properties and pad life, resulting in longer life and stronger braking. Sintered brake pads experience no brake fade when operating at high temperatures and in wet conditions. They also last up to 5 times longer than organic pads and provide additional braking strength. All materials used are environmentally friendly and do not contain any lead, asbestos, fibreglass or formaldehyde.

Reminder: one set of brake pads services one brake disc, if you are servicing multiple discs you will need multiple sets of brake pads.

Make	Model	Year Range	Capacity
Kawasaki	VN1500 MEAN STREAK	2002-2004	1500
Kawasaki	VN1600 MEAN STREAK	2004-2004	1600
Kawasaki	ZRX1100	1997-2001	1100
Kawasaki	ZRX1200	2001-2005	1200
Kawasaki	ZRX1200S	2001-2005	1200
Kawasaki	ZX12R	2000-2003	1200
Kawasaki	ZX6R	1998-2002	600
Kawasaki	ZX6R (ZX636A)	2002-2002	636
Kawasaki	ZX7R	1996-2003	750
Kawasaki	ZX9R	1996-2001	900
Suzuki	GS1200SS	2001-2001	1200
Suzuki	GSF1200 BANDIT	2001-2005	1200
Suzuki	GSF1200S BANDIT	2001-2005	1200
Suzuki	GSX1300R HAYABUSA	1999-2007	1300
Suzuki	GSX1400	2001-2008	1400
Suzuki	GSXR1000	2001-2002	1000
Suzuki	GSXR1100	1993-1998	1100
Suzuki	GSXR750	1994-1999	750
Suzuki	GSXR750W	1994-1995	750
Suzuki	TL1000R	1998-2003	1000
Suzuki	VZ1600 MARAUDER	2004-2004	1600

 

FA188 | FDB873 | 43082 1179 | 43082 1224 | 43082 1227 | 43082 1230 | 43082 1250 | 43082 1251 | 43082 1253 | 43082 1259 | 43082 1272 | 43082 1274 | 59100 40830 | 59100 46820 | 59130 46E00 | 59300 33870 | 59300 33890 | 59300 46820 | 59300 46840/830 | 59301 33870 | K4308-21274 | GF039-S3 | 686