New GOLDFREN Brake Pad - S3 Sintered Sports (PBPH27) #GF011S3

GOLDfren began manufacturing sintered disc brake pads for a wide range of off-road and road motorcycles in 1991, nearly three decades on from their first motorcycle brake pads GOLDfren has become one of the largest aftermarket manufacturers in the motorcycle brake disc pad industry. Their development of next-generation products has kept them at the technological forefront of Sintered Friction Braking providing you with confidence in the performance, durability and reliability of your brakes.

S3 Series:

The S3 sintered compound is optimal in dry and wet conditions for road & off-road motorcycles. For the road application, S3 pads are suitable for both the front and rear brake while on off-road applications the S3 is only recommended for the front brake. The S3 series is designed for low abrasive interaction with the rotor and quieter braking due to the ceramic composite material. It has an HH friction rating and performs better at higher temperatures than the AD compound. Friction materials contain metal-ceramic with a bronze-graphite and non-metallic friction additives are spread evenly on the base fine bronze body to achieve optimal friction properties.

Features:

• Very high static friction coefficient
• Minimal difference between wet and dry braking performance
• Good abrasive resistance
• Low abrasive interaction with the brake rotor material
• Longer life compared to organic and Kevlar composite materials

Application:

• For riders who demand a bit more than average from their bikes
• Recommended on both front and rear brakes (road application)
• Can also be used on the front brakes of off-road bikes and ATVs
• Works well on both dry and wet conditions

Operating Parameters:

• Specific pressure: 3.0 Mpa
• Sliding speed: 45 m/s
• Constant maximum temp: 450°C
• Short time maximum temp: 800°C
• Counter-surfaces: steel disks

What is a sintered brake pad?

GOLDfren only manufacturers sintered brake pads that contain metal-ceramic and ceramic-carbon friction materials, these materials allow for less brake dust and a quieter braking experience. Sintered brake pads are made by fusing together metallic particles under high temperature and pressure which enhances friction properties and pad life, resulting in longer life and stronger braking. Sintered brake pads experience no brake fade when operating at high temperatures and in wet conditions. They also last up to 5 times longer than organic pads and provide additional braking strength. All materials used are environmentally friendly and do not contain any lead, asbestos, fibreglass or formaldehyde.

Reminder: one set of brake pads services one brake disc, if you are servicing multiple discs you will need multiple sets of brake pads.

Make	Model	Year Range	Capacity
Honda	CBX250 Night Hawk	1991-2000	250
Honda	CBX250RS	1984-1986	250
Hyosung	GT250	2005-2011	250
Hyosung	GT250 COMET	2002-2014	250
Hyosung	GT250R	2005-2017	250
Hyosung	GT650 COMET	2003-2013	650
Hyosung	GT650R	2003-2013	650
Hyosung	GT650S	2006-2013	650
Hyosung	GV250 AQUILA	2002-2012	250
Hyosung	GV250N EFI AQUILA	2010-2016	250
Hyosung	GV650	2006-2014	650
Hyosung	GV650 AQUILA	2004-2005	650
Hyosung	GV650 PL EFI	2015-2016	650
Hyosung	ST 700	2011-2011	700
Hyosung	ST7	2010-2014	680
Hyosung	ST7L EFI	2015-2017	680
Hyosung	ST7L EFI DELUXE	2015-2017	680
Hyosung	XRX125 OFFROAD	1999-2006	125
Megelli	250R	2009-2010	250
Megelli	250S	2009-2010	250
Peugeot	50 SPEEDFIGHT 3 (AC)	2010-2012	50
Peugeot	50 SPEEDFIGHT 3, RS (LC)	2010-2013	50

 

FA86 | FDB312 | 251 0037 A | 45105 GE2 004 | 45105 GE2 006 | 45105 GE2 305 | 45105 KK4 004 | 45105 KK4 007 | 45105 KK4 014 | 45105 KR3 004 | 45105 KR3 007 | 45105 KR3 014 | 45105 KR3 601 | 45105 KR3 602 | 45105 KR3 603 | 45105 KW7 405 | 46630 FYBQ 000 | 59300 HG5 800 | 59301 HP9 500 | P4064905001002640 | PE776170 | GF011-S3 | 551